Oscillation of the K3 clutch control valve causes bore wear that prevents proper hydraulic actuation of K3 clutches.
Correction:
Recover hydraulic control and renew shift performance by reconditioning the bore and installing Sonnax oversized K3 clutch control valve kit.
Required tool:
F-15741-TL61
Band cntrl valve B1 TF60 was added to your shopping cart.
15741-61K
Band cntrl valve B1 TF60
loading...
Toolkit for 15741-01K TF60
Toolkit for 15741-01K TF60 was added to your shopping cart.
loading...
Part #
F-15741-TL
Reference #
Extra information
Tool kit
Reamer
Reamer Jig
Guide Pin
Tool kit for 15741-01K
NOTE: Sonnax F-Tool kits designed to service a specific bore require the VB-FIX, a self-aligning valve body reaming fixture.
Toolkit for 15741-01K TF60 was added to your shopping cart.
F-15741-TL
Toolkit for 15741-01K TF60
loading...
Adapterplate VB-Fix TF80, TF60
Adapterplate VB-Fix TF80, TF60 was added to your shopping cart.
loading...
Part #
F-15741-TL29PL
Reference #
Extra information
Adapterplate VB-Fix TF80, TF60
Plate
Screws (4)
Washers (2)
For VB-FIX
Required for securing small TF-80SC & TF-60SN valve bodies to VB-FIX for reaming.
NOTE:Sonnax F-Tool kits designed to service a specific bore require the VB-FIX, a self-aligning valve body reaming fixture.
Adapterplate VB-Fix TF80, TF60 was added to your shopping cart.
F-15741-TL29PL
Adapterplate VB-Fix TF80, TF60
loading...
Tool for 15741-59K TF60
Tool for 15741-59K TF60 was added to your shopping cart.
loading...
Part #
F-15741-TL59
Reference #
Extra information
Toolkit
Reamer
Reamer Jig
Guide Pin
Tool Kit for 15741-59K
NOTE:Sonnax F-Tool kits designed to service a specific bore require the VB-FIX, a self-aligning valve body reaming fixture.
Tool for 15741-59K TF60 was added to your shopping cart.
F-15741-TL59
Tool for 15741-59K TF60
loading...
Sleeve K2 09K, 09G, TF60
Sleeve K2 09K, 09G, TF60 was added to your shopping cart.
loading...
Part #
129355A
Reference #
Extra information
K2 Clutch Seal Ring Sleeve Kit
Symptoms: • Sleeve spins loose on aluminum cover • 3-4 Slip • No 4th
Cause: The OE sleeve rotates on the case due to insufficient press fit. This restricts oil flow to the K2 clutch (which is applied in 4th, 5th & 6th gear).
Correction:
The sleeve was designed for use with an anti-rotation pin and has an increased press fit, which results in greater retention.
Sleeve K2 09K, 09G, TF60 was added to your shopping cart.
129355A
Sleeve K2 09K, 09G, TF60
loading...
O-ring pump TF80 TF60
O-ring pump TF80 TF60 was added to your shopping cart.
loading...
Part #
83007
Reference #
265311
O-ring pump TF80 TF60 was added to your shopping cart.