Bypass-slve AX4N .496" 3.0 24v

• Plunger Valve

• Sleeve 

 .496" OE large spool diameter

• Precision sleeves are manufactured from highly wear-resistant aluminum.

• The aluminum plunger valves are hard-coat anodized to prevent wear.

Bypass control valve AXOD

• Sleeve

• Plunger Valve 

Bypass sl+plung.AX4N

• Plunger Valve

• Sleeve 

.486" OE large spool diameter

• Precision sleeves are manufactured from highly wear-resistant aluminum.

• The aluminum plunger valves are hard-coat anodized to prevent wear.

Bypass sl.AXODE,AX4S

• Plunger Valve

• Sleeve 

 Vehicles with an AXOD & E or AX4S transmission frequently have lube system failures, as well as torque converter clutch apply and release problems. These complaints can be aggravated by severe wear of the bypass clutch control plunger sleeve. Excess wear allows regulated converter charge and cooler oil leakage. This oil is fed to the lube circuits, cooler, TCC and into the sleeve to help maintain the TCC in the release position.

If the sleeve is worn, oil will exhaust past the plunger sleeve. Because this regulated converter charge oil is always present, either as release or apply pressure, severe leakage at the sleeve can result in a no TCC apply situation. 

Forward control valve Kit AXOD,AXODE,AX4S

• Valve

• Spring

• Retaining Clip 

Forward control valve AX4N

• Valve 
• Regulating Spring 
• Retainer Clip 
• Bumper Spring 

Manual valve AXOD(E)

Hard-Coat Finish, Lengthened Spool Diameter

 Delayed forward engagement, burned forward clutch, and/or forward clutch psi low by 10-15 psi in vehicles with AXOD, AXODE, AX4N/S or 4F50N transmissions are common complaints. These are often caused by a worn valve body at the manual valve bore, allowing excessive oil leakage. Replace the worn OE manual valve with Sonnax manual valve 96201-05 to prevent oil leakage and increase stability at the linkage.

Sleeve 1-2 accumulator AXOD/AX4S

• Sleeve 
• Piston 
• Viton® O-Ring 

1-2 Accumulator

The accumulator bores on AXOD & E, AX4S channel castings can become scored, which creates loss of clutch pressure or cross leaks. The continuous oscillation of the piston within the bore causes excessive wear. Also a broken accumulator spring can get caught between the piston and the bore causing a deep groove in the casting wall.

Sure cure AXODE

• Boost Valve Kit 
• Bypass TCC Control Plunger Valve Kit 
• Forward Control Valve Kit 
• 3-2 Timing Valve Saver Cap Kit 
• Retaining Ring, Rear Ring Gear 
• Retainer, 3-2 Timing Valve 
• 1-2 Capacity Modulator Valve Retainer 
• Backout Valve Clip 
• Oil Pump Shaft Plug 

 Sonnax Sure Cure Kits combine the best Sonnax products into one box, offering rebuilders a convenient and cost-effective way to address common transmission problems. These kits simplify ordering, stocking and estimating job costs, and include easy-to-read, step-by-step instructions that cover the inspection and repair of the most critical areas of the unit, and even a reference list of rebuilding specifications.

Symptoms:

• 1-2 Flare
• 2-1 Clunk
• 2-3 Flare
• Clutch & band failures
• Code 741, 1741, 1744
• Delayed engagement
• Erratic line pressure
• Forward slip
• Harsh Reverse
• No 4th
• No Forward
• Non-adjustable (high) throttle pressure
• Pump noise
• Pump rotor damage
• Reverse slip
• TCC apply & release concerns
• TCC codes & overheating
• TCC cycling
• TCC surge

Sure Cure AX4N

• Boost Valve Kit 
• Oversized Bypass Clutch Control Valve Kit requires tool kit 96206-TL
• Oversized Converter Regulator Valve Kit requires tool kit 96201-TL3 or F-96201-TL23 & VB-FIX
• Oversized Solenoid Regulator Valve Kit requires tool kit 96201-TL2
• Forward Control Valve Kit Patent No. 6,736,747, Sonnax recommends bore sizing tool 96206-BST*
• Pump Slide Pin 
• Relief Valve, Low Radius (2)

 Sonnax Sure Cure Kits combine the best Sonnax products into one box, offering rebuilders a convenient and cost-effective way to address common transmission problems. These kits simplify ordering, stocking and estimating job costs, and include easy-to-read, step-by-step instructions that cover the inspection and repair of the most critical areas of the unit, and even a reference list of rebuilding specifications.