Zip kit 6F35

• O-Ringed End Plug Kit 
• Control Pressure Regulator Valve Kit 
• TCC Regulator Valve Kit, Spring, Shuttle Valve, End Plug & O-Rings 2 O-rings, 1 extra
• AFL Balance Plugs (2) Not Shown
• Solenoid Pressure Regulator Valve, Sleeve, Spring & Retainer Clip 
• SSA Damper Piston & Spring 
• Checkballs (3) .250" dia.
• Drill Bit Not Shown

Features and benefits:

This TransGo Shift Kit includes an oversized solenoid pressure regulator valve. The new valve is oversize, therefore you will need the TransGo tool-kit part # AFL-G2-TL to ream the bore. This universal tool-kit works for all generation 2 6F35, 6T30, 6T40, 6T45, 6T50, 6T70, 6T75 and 6T80 transmissions.

A new drop-in hardened steel TCC regulator valve that has re-positioned longer lands and incorporates a groove where a scarf cut seal is fitted so that it seals in the original worn bore. Also, a drop-in two-piece design PR valve reduces sticking and restores the function and reliability of the pressure regulator system. In addition, this valve will not delaminate and create future bore wear problems like the OE coated valves do. The two-piece design valve out performs the single piece valve in all operating environments. Lastly, the kit includes an improved replacement valve body separator plate and gaskets.

Corrects/Prevents/Reduces:

• 2-3 cut-loose
• No reverse
• Erratic or hunting TCC
• Codes: P0729, P0731, P0732, P0733, P0734, P0735, P0741 and P1744

Includes:

• Drop-in USA-made hardened steel two-piece pressure regulator valve
• Oversized USA-made hardened steel solenoid regulator valve
• Drop-in USA-made hardened steel TCC regulator valve, scarf cut sealing ring, spring and O-ring (for sizing only)
• Improved valve body separator plate and gaskets

Impeller Hub
Part No. FD-90-73G

Early-style

Thrust Bearing
Part No. FD-N-14